Table of Contents Jwf
3.1 OVERViEW OF TYPE-B INTERFACE BOARD 3-1 3.2 C82305VC82306 SERIAL INTERFACE CARD_3-2 . . . 3-2 . 3.2.2.1 Data 3.2.2.2 Handshaking 3.2.3 DIP Switch 3.2.4 Jumper 3.2.5 Recommended Circuit 3.2.6 Operation 3.2.7 Circuit Board Component 3.2.8 Circuit 3.3 C82307 C82308 32KB SERIAL INTERFACE CARD_3 10 3.3.2.1 Data 3.3.2.2 Handshaking 3.3.3 Self Test 3.3.3.1 Loopback 3.3.3.2 Line Monitor 3.3.4 Dip Switch 3.3.5 Jumper 3.3.6 RAM 3.3.7 Operation 3.3.8 Circuit Board Component 3.3.9 Circuit 3.4...
OFF Pby
Note 1 J1 jumper is connected at the factory, and this setting should NOT be changed by user. BID is ON, UNID is OFF This setting has no meaning at the specifications of this interface card. It will allow bidirectional communication that interface the interface card to host computer by the BID is OFF, UNID is ON Factory setting. Note 2 J2 jumper is connected at the factory, and this setting should NOT be changed by the J2 is OFF TMP90C840 CPU is used without P-ROM. J2 is ON TMP90C841 CPU is...
Info Bql
Figure 3-16. Circuit Board Component Layout The EPSON type-B 32KB IEEE-488 interface card C82313 is a versatile and trouble free interface card suitable for data communications between IEEE-488 computers or instruments and an EPSON printer. Operation in either the address mode or listen only mode. When in the address mode, up to 31 address number, from O to 30, can be selected using a combination of DIP switch. An 32K bytes buffer that frees up a computer for other tasks while the printer...