HopperRetard Roller Unit CAUTION
1) Remove the ASF Unit. (p44)
2) Lift up the Hopper toward the direction of the arrow, release the two tabs, and remove the spring and the hopper from the ASF Frame.
3) Remove Extension Spring 0.585 from both the ASF Frame and the Paper back Lever.
4) Remove the Paper Back Lever from the bearing of the ASF frame.
5) Remove Compression Spring 1.88 from the ASF Frame, and remove the Retard Roller Unit.
- Figure 4-8. Removing Retard Roller Unit
■ When installing the Retard Roller or the Paper Back Lever, attach the two springs as described below.
• Extension Spring 0.585
Attach the spring to the tab of the ASF Frame and the one of the Paper Back Lever.
• Compression Spring 1.88
Attach the spring to the boss of the ASF Frame and the one of the Retard Roller Unit.
- Figure 4-9. Attaching the Springs
■ When installing the spring between the Hopper and the ASF Frame, match the spring with the positioning hole (circular dent) of the Hopper and the one of the ASF Frame.
- Figure 4-10. Attaching the Springs
Post a comment