I Iwp
Do not touch the rib of Paper guide front and Porous Pad, Paper guide, Front . Do not touch eight feet of Porous Pad, Paper guide, Front Sub . When assembling Paper guide front to main frame, Do not touch the rib of Paper guide front and Porous Pad, Paper guide, Front . Make sure to install the dowels of Paper guide front into the holes of main frame. Make sure that there is no gap between Paper guide front and main frame. Be careful not to bend eight feet of Porous Pad, Paper guide, Front Sub...
I Ubi
In case that Cap, Detector, PW is removed, PW sensor board is free. Therefore, be caureful not to damage PW sensor board. 13 Disconnect Head FFC from the connectors on print head board, and remove Print head assy. from IC holder. 13 Disconnect PW sensor FFC from the connector of PW sensor board. CR encoder sensor board removal 13 Release two hooks for securing CR encoder sensor board to IC holder, and disconnect CR encoder senser FFC from the connector of CR encoder sensor board. Make sure...
Disassembly And Assembly
This section describes procedures for disassembling the main components of the Stylus C63 64 83 84. Unless otherwise specified, disassembly units or components can be reassembled by reversing the disassembly procedure. Things, if not strictly observed, that could result in injury or loss of life are described under the heading Warning. Precautions for any disassembly or assembly procedures are described under the heading CAUTION. Chips for disassembling procedures are described under the...
I Ded
Are all the lubrication made at the specified points Is the amount of lubrication correct Are the ink cartridges installed correctly Have all relevant protective materials been attached to the printer Have all the relevant items been included in the package 1.2 Caution regarding assembling disassembling of the printer mechanism, and how to ensure of quality on re-assembled product On current low end models, we basically forbided to remove Housing Lower from Printer mechanism in your repair....