Info Ndb
In Out refers to the direction of signal flow from the printer's point of view. The printer responds affirmatively when the extensibility request values are 00H or 04H, that mean, 00H Request Nibble Mode Reverse Channel Transfer. Return Data Using Nibble Mode Rev Channel Transfer. The printer sends following device ID string when it is requested. When IEEE1284.4 is enabled, 00H 4EH MFG EPSON CMD ESCPL2,BDC,D4 MDL Stylus SP XXX Note 1 00H denotes a hexadecimal value of zero. 2 MDL value depends...
Adjustment Program feature
The user interface of the main menu on this program is shown below. The adjustment program enables you to set various values correctly to prevent malfunction and fluctuation of printing quality and printing function caused by difference in components and assembly when the printer components are replaced during repair. Basic adjustment items by using this program are shown as fellows. This program does not operate under DOS or Windows 3.X, NT. Perform this adjustment program using parallel I F...
Waste ink pad removal
1. Remove the upper housing. Refer to Section 4.2.1 2. Remove the ASF unit. Refer to Section 4.2.2 Figure 4-8. Removing the Waste ink pad Figure 4-8. Removing the Waste ink pad When the Waste ink pad is replaced with a new one, following service item is required. Waste ink counter reset operation. Refer to Section 5.1.12 When assembling the Waste ink pad, be sure to set the tip of the ink tube in the correct position of the Waste ink pad. Otherwise it will cause ink leakage.