Levelness Adjustment of the Bin Unit
1. Remove the covers from the both legs of the 10-Bin Unit.
4. If the knob is turned counterclockwise, the 10-Bin Unit moves in the direction shown in the figure below.
- Figure 5-21. Adjustment - 1
2. Loosen the 2 wing bolts.
Figure 5-22. Adjustment - 2
3. Turn the knob attached to each leg of the unit to adjust its standing position.
|
c=i | |||
|
u |
o W | ||
Figure 5-23. Adjustment - 3
5. After the standing position has been adjusted, tighten the wing bolts.
6. Reinstall the covers onto the legs of the 10-Bin Unit.
Post a comment